Klune Samurai Kits
We no
longer have the complete kits. They are out of production, and we do not have
the prints or patterns to build more. We do have some parts left: We can supply
Klune
Underdrive $1875
Adapter kit components remaining:
(To
understand what these parts are and whet is involved see Klune-V
Samurai Installation Manual
We have a
few of these left: NO MORE: ALL GONE: THESE ARE
NO LONGER AVAILABLE: Adapter to bolt the Klune to the Samurai Tcase.
We
DO have adapters to some other offset rear driveshaft tcases: Toyota Land
Cruiser, Jeep Dana 18.
The
installation kit was originally $595.We can supply an incomplete set as below
for $250 If you still want to do it, and try to make your own
adapter to attach the Klune to the Sammi tcase, I'll throw in the remaining
parts below at no extra charge with the purchase of a Klune.
Sheet
metal panels kit
I have the
23 spl stub needed to make up the Klune input flange, you can fab a flange from
this (I will throw it in) or I can have a flange built for you $245 complete
each.
I have the
laser ct portion of the mount (called the “shoe” in the instructions) (the
part that bolts to the Klune) you will need to complete the mount. The remainder
could be fabricated from a piece of steel channel and welded up.