NV4500 Conversion Package
83-87 Ford 6.9L Diesel: NV4500 replacing a Ford 4 speed
HOME
Other Products
Guide to 4WD Gearing
Customer Free Tech Line
Complete Conversion Kits
Beadlock Wheels
High Impact T400 Bad Boy Automatic Transmission
Dodge A518/618 47/48 RE "BadBoy"
Klune-V Extreme Underdrive
NV4500 5spd
NV3550 5spd
Other Stick Transmissions
Transfer Cases
Overdrive Conversions
Overdrives & Underdrives
Contact High Impact
Apps by Vehicle Type
NV4500 Applications
NV4500 10 speed system
GM 92-01 6.5L Diesel
GM 82-93 6.2L Diesel
Ford 7.3 Diesel - Auto Trans rplmt
Ford 7.3 Diesel - replacing a ZF 5spd
Ford 7.3 Diesel - replacing 4 speed
Ford 6.9 Diesel - Replacing an automatic
Ford 6.9 Diesel - Replacing a 4speed
Dodge 5.9 Diesel - Getrag rplmt
Dodge 5.9 Diesel 88-up auto trans rplmt
NV4500 Diesel Applications
Dual Mass vs Solid FW
Phone Toll Free
888-316-2940
Customer Service: When you buy a package from High Impact, free tech support is available from a QUALIFIED engineer for any questions or issues you may have both during and after your install. An engineer will go over the details of your system with you at the time of purchase to go over options, and verify the exact engineering and parts included in your kit is correct for your application
Package for 2WD (and divorced Tcase 4WD*) applications
| Conversion Package | Purchased Separately |
Package Total |
| Including: |
$2,987.53 |
|
| New Dodge NV4500 Transmission | $2275.00 | incl |
| NV4500 Bellhousing Adapter | $245.30 | incl |
| Shifter stick | $55.89 | incl |
| Rubber and steel NV4500 trans mount | $68.31 | incl |
| This system is designed around the use of a 1 pc SOLID Flywheel. Contact High Impact for Dual Mass applications) article Dual Mass vs Solid FW | ||
| Clutch Disc (For use with Solid, NOT Dual Mass FW) | $195.22 | incl |
| Pressure plate | $85.86 | incl |
| Throwout Bearing | $32.33 | incl |
| (Pilot bearing included w BH adapter kit) | incl | |
| Slave Cyl | $88.96 | incl |
| Gal "SynTorque" Lubricant (req for NV4500) | $60.72 | incl |
Package for 4WD (Married Tcase*) Conversions
Same as above, however add:
| Purchased Separately | Package Pricing | |
| Ford Transfer Case Adapter (needed for 4WD only. Includes Tcase shifter mount bkt) | $372.60 | $295.96 |
Installation & Application Notes:
NV4500 Replacing a Ford 4 speed Transmission:
The package above forms a system is designed to replace a Ford 4 speed transmission with an NV4500 5 speed. All of the major components needed are supplied for this conversion, with the exception of the clutch pedal assembly. An adapter plate is used to bolt to your stock bellhousing. Your clutch linkage can remain unchanged.
There are part number variations in some of the components in this kit due to the year of your 6.9L Diesel engine. We will want your details to help us engineer your system with the exact right parts.
Fitting an NV4500 into a Ford
The factory 5 speed transmission used in 90s HD Fords are ZF 5 speeds. This ZF is a decent trans, however does not seem to be quite up to the requirements placed on it by more demanding Ford owners. We have developed a conversion system to install a NEW NV4500 into Ford Diesel applications providing improved reliability and load handling. This transmission as supplied has been built and modified from a NEW OEM NV4500 to fit in your Ford truck.
Dual Mass vs Solid Flywheel:
We have found it simplest to engineer these conversions around a solid (rather than dual mass) flywheel. We have found dual mass flywheels will not work properly on engines they are not specifically tuned for. You can take a stock engine with a dual mass flywheel, perform aftermarket modifications on the engine, and shortly thereafter the dual mass flywheel may fail: It is not set up for your engine now that you have changed it. It is simpler, and therefore less chance of error, to specify parts for stock and modified engines when using solid flywheels. If you definitely prefer a dual mass system, we will work with you to engineer a system for your application.
article Dual Mass vs Solid FW
4WD applications
Married Transfer case*
Applications with a "Married" (bolted directly to the transmission tail adapter)* will use an adapter for Ford style transfer cases 1970 and up. Adapters for other transfer cases are available, contact High Impact.
Divorced Transfer Case*
Applications with "Divorced" (mounted separately from the trans and linked by a short driveshaft*) transfer cases will be supplied with a 2WD NV4500 with a short, fixed yoke tail and will have no speedo provisions (Your speedo is either on your Tcase or your rear axle)
2WD
The (Brand New) NV4500 are standard supplied with a Dodge style slip yoke, and provisions for a choice of mechanical or electrical speedo. A short fixed yoke output is available, however the only speedo provisions are for none or GM pulse sender
Driveshaft(s)
You will need to have your driveshaft(s) modified for length. A local driveshaft shop is usually available to do this. If necessary, we can do it, however it is better to install the unit FIRST, then measure and build/modify driveshafts
Crossmember
You may need to relocate your crossmember, this can usually be done by re-drilling the frame and bolting into the desired location. You will need to drill the crossmember for the bolts to the larger NV4500 transmission mount